Cla-val CPC Bedienungsanleitung PDF herunterladen

Thank you for purchasing a CLA-VAL CPC. With appropriate care, this CPC will provide accurate and reliable control of

your valve for many years. The CPC is built with the latest technology using only very high quality components.

The CPC is a 4-20 mA standalone actuated control which is PC calibrated and able to remotely control any CLA-VAL

valve. The pilot setting can be adjusted with a standard 4-20 mA signal. It also incorporates a 4-20 mA position feedback

signal to cross check if the requested position is reached.

General Disclaimer

In accordance with our policy of continuous development and improvement, CLA-VAL reserves the right to modify or im-

prove these products at any time without prior notice. CLA-VAL assumes no liability or responsibility for any errors or

omissions in the content of this document.

Please review this manual thoroughly before starting

1. Visit our internet address and, if necessary, update the CPC with the latest Software and Firmware versions.

2. Troubleshooting at start up (after wiring actuator and applying 24 VDC power).

a. View LED diagnostics

located on top of

actuator.

b. At start-up, the LED

should remain red for 5

seconds than turn to

solid Green

c. Green - OK normal

status.

d. No light - Check power

supply.

e. Red - High torque limit

probably exceeded

Power down and up

again. Excess voltage

(above 32 volts).

3. Blinking red/green

a. Calibration was not

completed correctly

recalibrate.

4-20 mA Actuated Position Control

CPC

MODEL

INSTALLATION / OPERATION / MAINTENANCE

CPC

Maintenance cable

Adapter socket

Input/Output cable moulded

10 meter standard execution

Maintenance port

PC Connection

Adaptable side

CPC Connection

Power supply cable

moulded 10 meter

standard execution

Security Low Sensor

Security High Sensor

Led indicator

1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - General Disclaimer

Thank you for purchasing a CLA-VAL CPC. With appropriate care, this CPC will provide accurate and reliable control ofyour valve for many years. The CP

Seite 2 - Wiring Diagram

Page 10Configuration1. The configuration tab sets the Rotation speed and the Dead band. 2. The Rotation speed affects the response time of the valve b

Seite 3

Page 11Alarms The CPC incorporates a LOW and HIGH Alarm with an adjustable hysteresis setting. The low and High alarm levels are activated within the

Seite 4 - Software / Firmware Updates

N-CPC (R-3/2011)GLOBAL HEADQUARTERSP.O. Box 1325 Newport Beach, CA 92659-0325Phone: (949) 722-48001-800-942-6326 Fax: (949) 548-5441E-mail: claval@

Seite 5 - Hardware Update Wizard

CPC Series Actuator Wiring DiagramTerminal strip not supplied forIllustration purpose only*DO NOT WIRE 24 VDC POWER*IMPORTANT!Before applying power, c

Seite 6 - CPC : (8)..>907060023

Page 3Download Wiring Diagram from website:(www.cla-val.com)Electrical SpecificationsElectrical Power:• 24 VDC, 6 / 10 / 15 rpm / sizes300 mA max. loa

Seite 7 - Display Window

Installation Instructions 3. The CPC should be mounted in the vertical position. 4. All installation, adjustment and maintenance should be carried out

Seite 8 - Initial preparation:

Page 5USB Driver InstallationWhen the CPC cable is connected the first time, the laptopwill detect it and request a driver. Select "Cancel".

Seite 9 - Calibration - Variable Range

Page 6Configuration ModeTo open e-Drive Software when not connected to the actua-tor, the e-Line list will be empty. Click "Cancel" to launc

Seite 10 - Configuration

General informationDisplaypressure values Configuration information Activated continuous readingDisplay Set point and feedback position Activated over

Seite 11 - LIN040UE-07

Page 8Static Calibration (0% - 100%) The “Set range” allows calibration in either dynamic or staticmode. When the “Set Range” is clicked, the followin

Seite 12 - N-CPC (R-3/2011)

Page 9Calibration - Variable RangeCalibration Mode to a specific process WITH System pressure.Initial preparation: This calibration mode is for field

Kommentare zu diesen Handbüchern

Keine Kommentare

Cla-val CPC Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Cla-val CPC herunter. Cla-Val CPC User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Cla-val CPC